TulsaWinch.net - by Darby Equipment 903-883-6366

Darby Equipment Company is a distributor of Tulsa Rufnek winches. We sell winches, we service winches and we rebuild winches. Additionally, we always carry a few repaired winches with plenty of meat still on the bull gear for operators running on a tight budget. Finally, we collect discontinued and hard-to-find winch parts for your old iron that you plan on running forever.

Tulsa Rufnek 130W Worm Gear Winch

For Tulsa Rufnek 130W Worm Gear Winch availability call (903) 883-6366.

Tulsa Rufnek 130W Winch Specifications:

Pulling Capacity: 130,000 lbs/58,968 kg

Mechanical Weight: 2,500 lbs/1,134 kg

Hydraulic Weight: n/a

 

The Tulsa Rufnek 130w worm gear winch is operated by turning the input of the worm using a hydraulic motor or PTO driven sprocket and chain.  The winch utilizes an adjustable brake that activates only during pay-out to provide maximum efficiency during pay-in. The torque is transferred from the gearbox through the drum shaft which is keyed to a mechanically actuated sliding clutch that when engaged transfers the torque to the drum.

Winch Care Tip:

Winch mounting must be secure and able to withstand the applied loads.

  • The stability of the mounting system must be approved by a qualified person.
  • All welding should also be done by a qualified person.
  • Winch mount must be flat so as not to induce binding.
  • The flatness must not exceed 1/16 inch across the mounting surface of the winch itself.

Guards must be placed on all open drives in the case of mechanical winches.

Insure that all PTO’s and drivelines are sized appropriately for the winch manufactures speed and torque specifications.

Tulsa Rufnek 130W Isometric Drawing:

Tulsa Rufnek 100W Worm Gear Winch

For Tulsa Rufnek 100W Worm Gear Winch availability call (903) 883-6366.

Tulsa Rufnek 100W Winch Specifications:

Pulling Capacity: 100,000 lbs/45,360 kg

Mechanical Weight: 1,975 lbs/896 kg

Hydraulic Weight: 2,076 lbs/942 kg

 

The Tulsa Rufnek 100w worm gear winch is operated by turning the input of the worm using a hydraulic motor or PTO driven sprocket and chain.  The winch utilizes an adjustable brake that activates only during pay-out to provide maximum efficiency during pay-in. The torque is transferred from the gearbox through the drum shaft which is keyed to a mechanically actuated sliding clutch that when engaged transfers the torque to the drum.

Winch Care Tip:

  • Must read and understand the operating and service manual.
  • Must never lift or move people with this winch.
    This winch is not designed or intended for any use that involves moving people.
  • Must stay clear of the load at all times.
    Ground personnel should remain a safe distance from the load and winch cable
    at least 1 ½ times the length of cable measured from the winch to the load.

Tulsa Rufnek 100W Isometric Drawing:

Tulsa Rufnek 30W Worm Gear Winch

For Tulsa Rufnek 30W Worm Gear Winch availability call (903) 883-6366.

Tulsa Rufnek 30W Winch Specifications:

Pulling Capacity: 30,000 lbs/13,608 kg

Mechanical Weight: 650 lbs/295 kg

Hydraulic Weight: 678 lbs/308 kg

 

The Tulsa Rufnek 30w worm gear winch is operated by turning the input of the worm using a hydraulic motor or PTO driven sprocket and chain.  The winch utilizes an adjustable brake that activates only during pay-out to provide maximum efficiency during pay-in. The torque is transferred from the gearbox through the drum shaft which is keyed to a mechanically actuated sliding clutch that when engaged transfers the torque to the drum.

Winch Care Tip:

The Tulsa worm gear winch is operated by turning the input of the worm using a hydraulic motor or PTO driven sprocket and chain. The winch utilizes the adjustable, spring applied, multiple disc oil brake that activates only during pay-out to provide maximum efficiency during pay-in. The torque is transferred from the gearbox through the drum shaft which is keyed to a mechanically actuated sliding clutch that when engaged transfers the torque to the drum.

Tulsa Rufnek 30W Isometric Drawing:

Tulsa Rufnek 45W Worm Gear Winch

For Tulsa Rufnek 45W Worm Gear Winch availability call (903) 883-6366.

Tulsa Rufnek 45W Winch Specifications:

Pulling Capacity: 45,000 lbs/20,412 kg

Mechanical Weight: 1,076 lbs/488 kg

Hydraulic Weight: 1,138 lbs/516 kg

 

The Tulsa Rufnek 45w worm gear winch is operated by turning the input of the worm using a hydraulic motor or PTO driven sprocket and chain.  The winch utilizes an adjustable brake that activates only during pay-out to provide maximum efficiency during pay-in. The torque is transferred from the gearbox through the drum shaft which is keyed to a mechanically actuated sliding clutch that when engaged transfers the torque to the drum.

Winch Care Tip:

  • All winch controls must be well marked for function to avoid confusion.
  • Insure that the PTO is disengaged when the winch is not in use.
  • All winch controls must be located to provide the operator with a clear view of the
    load.

Tulsa Rufnek 45W Isometric Drawing:

Tulsa Rufnek 20W Worm Gear Winch

For Tulsa Rufnek 20W Worm Gear Winch availability call (903) 883-6366.

Tulsa Rufnek 20W Winch Specifications:

Pulling Capacity: 20,000 lbs/9,072 kg

Mechanical Weight: 520 lbs/236 kg

Hydraulic Weight: 545 lbs/247 kg

 

The Tulsa Rufnek 20w worm gear winch is operated by turning the input of the worm using a hydraulic motor or PTO driven sprocket and chain.  The winch utilizes an adjustable brake that activates only during pay-out to provide maximum efficiency during pay-in. The torque is transferred from the gearbox through the drum shaft which is keyed to a mechanically actuated sliding clutch that when engaged transfers the torque to the drum.

Winch Care Tip:

Tulsa Winch worm gear winches require regular maintenance to ensure safe and reliable operation. Regular oil changes with the correct oil for the ambient temperature conditions and an annual inspection of the wear components are strongly recommended.

Tulsa Rufnek 20W Isometric Drawing:

For more information on Tulsa Rufnek winches, visit darbyequipment.com or call (903) 759-4445.
Copyright 2011 Darby Equipment. All rights reserved. Website designed by Speedy Media.